#9 (No. 9) Reinforcing Bar - ASTM (US)

#9 (No. 9) is a ASTM (US) reinforcing bar to ASTM A615 / A706 (Table 1). Its nominal diameter is 1.128 in (28.7 mm), giving a cross-section area As of 1 in² (645 mm²) and a mass of 3.4 lb/ft (5.06 kg/m). It is supplied in grade Gr.60 / Gr.75 / Gr.80 with characteristic yield f_yk = 420 MPa. The tables below give the total steel area for 1-10 bars and the area per foot of width at common bar spacings.

Area As: 1 in² (645 mm²)
Diameter: 1.128 in (28.7 mm)
Mass: 3.4 lb/ft (5.06 kg/m)
f_yk: 420 MPa

Bar properties

d	Nominal diameter	1.128 in / 28.7 mm
As	Cross-section area	1 in² / 645 mm²
m	Mass per metre	3.4 lb/ft / 5.06 kg/m
u	Nominal perimeter	90.2 mm
f_yk	Characteristic yield	420 MPa

Total area for n bars (As = n × 1 in²)

Bars	1	2	3	4	5	6	7	8	9	10
As (in²)	1.00	2.00	3.00	4.00	5.00	6.00	7.00	8.00	9.00	10.00

Area per foot at spacing (As/ft = 12/s × 1 in²)

s (in)	3	4	5	6	8	10	12	18
As/ft (in²/ft)	4.00	3.00	2.40	2.00	1.50	1.20	1.00	0.67

Source: ASTM A615 / A706 (Table 1). Area = π/4 × d² for metric bars; ASTM areas are the standard's tabulated nominal values. Grades available: Gr.60, Gr.75, Gr.80.

Other ASTM (US) bar sizes

#3 (No. 3)#4 (No. 4)#5 (No. 5)#6 (No. 6)#7 (No. 7)#8 (No. 8)#10 (No. 10)#11 (No. 11)#14 (No. 14)#18 (No. 18)

Rate this

No ratings yet

Loading…