CHS 114.3×3.2 vs CF CHS 114.3×3
CHS 114.3×3.2 is an CHS Hot-finished section from the UK Blue Book (SCI P363); CF CHS 114.3×3 is the closest equivalent in the UK Blue Book (SCI P363). CHS 114.3×3.2 carries more bending: 39.5 cm³ of plastic modulus against 37.2 cm³, 6.2% more. CF CHS 114.3×3 is the lighter of the two at 8.23 kg/m against 8.77 kg/m, a saving of 6.6% on steel weight. Both are about 114 mm deep, so either fits the same construction zone.
| Property | CHS 114.3×3.2 CHS Hot-finished | CF CHS 114.3×3 CHS Cold-formed | Difference |
|---|---|---|---|
| Mass | 8.8 kg/m | 8.2 kg/m | +6.6% |
| Depth | 114.3 mm | 114.3 mm | same |
| Width | 114.3 mm | 114.3 mm | same |
| Web thickness | 0 mm | 0 mm | same |
| Flange thickness | 0 mm | 0 mm | same |
| Area | 11.2 cm² | 10.5 cm² | +6.7% |
| Second moment, major (Iy) | 172 cm⁴ | 163 cm⁴ | +5.5% |
| Plastic modulus, major (Wpl,y) | 39.5 cm³ | 37.2 cm³ | +6.2% |
| Elastic modulus, major (Wel,y) | 30.2 cm³ | 28.4 cm³ | +6.3% |
| Second moment, minor (Iz) | 172 cm⁴ | 163 cm⁴ | +5.5% |
| Plastic modulus, minor (Wpl,z) | 39.5 cm³ | 37.2 cm³ | +6.2% |
| Radius of gyration, minor (iz) | 3.93 cm | 3.94 cm | -0.3% |
| Torsion constant (It) | 345 cm⁴ | 325 cm⁴ | +6.2% |
CHS 114.3×3.2 to BS EN 10210-2:2006; CF CHS 114.3×3 to BS EN 10219-2:2006. Difference is expressed relative to CF CHS 114.3×3.
How to choose between them
On stiffness, CHS 114.3×3.2 has the larger second moment of area: 172 cm⁴ against 163 cm⁴, a difference of 5.5%. This matters more often than the strength comparison, because on normal floor spans deflection rather than bending capacity sets the beam size - so if the two are close on modulus but apart on inertia, the stiffer one is usually the better answer even when it is not the stronger one.
Measured as bending capacity per kilogram, the two are equally efficient (4.5 against 4.5 cm³ per kg/m), so on a pure steel-tonnage basis there is nothing to choose between them. The decision comes down to availability, connection detailing and what the rest of the frame uses.
In short, CHS 114.3×3.2 is the stronger section and CF CHS 114.3×3 is the lighter one; where those are the same section, it is the clear choice, and where they are not, decide on whether your design is governed by capacity or by tonnage.