CHS 193.7×10 vs CF CHS 193.7×10
CHS 193.7×10 is an CHS Hot-finished section from the UK Blue Book (SCI P363); CF CHS 193.7×10 is the closest equivalent in the UK Blue Book (SCI P363). They are close to interchangeable in bending: 338 cm³ against 338 cm³ of plastic modulus, a difference of 0.0%. They weigh essentially the same, 45.3 kg/m and 45.3 kg/m. Both are about 194 mm deep, so either fits the same construction zone.
| Property | CHS 193.7×10 CHS Hot-finished | CF CHS 193.7×10 CHS Cold-formed | Difference |
|---|---|---|---|
| Mass | 45.3 kg/m | 45.3 kg/m | same |
| Depth | 193.7 mm | 193.7 mm | same |
| Width | 193.7 mm | 193.7 mm | same |
| Web thickness | 0 mm | 0 mm | same |
| Flange thickness | 0 mm | 0 mm | same |
| Area | 57.7 cm² | 57.7 cm² | same |
| Second moment, major (Iy) | 2,440 cm⁴ | 2,440 cm⁴ | same |
| Plastic modulus, major (Wpl,y) | 338 cm³ | 338 cm³ | same |
| Elastic modulus, major (Wel,y) | 252 cm³ | 252 cm³ | same |
| Second moment, minor (Iz) | 2,440 cm⁴ | 2,440 cm⁴ | same |
| Plastic modulus, minor (Wpl,z) | 338 cm³ | 338 cm³ | same |
| Radius of gyration, minor (iz) | 6.5 cm | 6.5 cm | same |
| Torsion constant (It) | 4,880 cm⁴ | 4,880 cm⁴ | same |
CHS 193.7×10 to BS EN 10210-2:2006; CF CHS 193.7×10 to BS EN 10219-2:2006. Difference is expressed relative to CF CHS 193.7×10.
How to choose between them
On stiffness, CF CHS 193.7×10 has the larger second moment of area: 2,440 cm⁴ against 2,440 cm⁴, a difference of 0.0%. This matters more often than the strength comparison, because on normal floor spans deflection rather than bending capacity sets the beam size - so if the two are close on modulus but apart on inertia, the stiffer one is usually the better answer even when it is not the stronger one.
Measured as bending capacity per kilogram, the two are equally efficient (7.5 against 7.5 cm³ per kg/m), so on a pure steel-tonnage basis there is nothing to choose between them. The decision comes down to availability, connection detailing and what the rest of the frame uses.
In short, these two are genuine equivalents. Pick whichever your supplier stocks and the rest of the frame already uses.