2L 4X4X3-4 - Section Properties

2L 4X4X3-4 has a mass of 37 lb/ft (55.1 kg/m), tabulated to AISC Shapes Database v16.0. A 12 m length therefore weighs about 661 kg, which is the figure to use for a steel take-off or when checking a lift.

2L 4X4X3-4 has a depth of 4 in (101.6 mm), with a cross-sectional area of 10.9 in² (70.3 cm²). These are the nominal dimensions from AISC Shapes Database v16.0; rolling tolerances apply to the delivered section.

The plastic section modulus about the major axis, Wpl,y, is 163.87 cm³, and the elastic modulus Wel,y is 91.44 cm³. Wpl,y is what sets the moment capacity of a Class 1 or 2 section: M_pl,Rd = Wpl,y x f_y / gamma_M0, so at S355 with gamma_M0 = 1.0 this section reaches about 58 kNm before any stability check.

The second moment of area about the major axis, Iy, is 632.7 cm⁴, and about the minor axis Iz is 1,357 cm⁴. Iy is the value deflection depends on - for a simply supported beam under a uniform load, the midspan deflection is 5wL⁴/384EIy - so on spans where a deflection limit governs rather than strength, this is the number that decides the section.

iy is 3 cm about the major axis and iz is 4.39 cm about the minor axis. Column buckling is governed by the SMALLER value: the slenderness is lambda = L_cr / i, so with iz = 4.39 cm a 0.4 m effective length already gives lambda = 100. Minor-axis buckling almost always controls unless the weak axis is restrained.