HSS 8X8X1-4 - Section Properties

HSS 8X8X1-4 has a mass of 25.82 lb/ft (38.4 kg/m), tabulated to AISC Shapes Database v16.0. A 12 m length therefore weighs about 461 kg, which is the figure to use for a steel take-off or when checking a lift.

HSS 8X8X1-4 has a depth of 8 in (203.2 mm), a width of 8 in (203.2 mm), a web thickness of 0.233 in (5.9 mm), a wall thickness of 0.233 in (5.9 mm), with a cross-sectional area of 7.1 in² (45.8 cm²). These are the nominal dimensions from AISC Shapes Database v16.0; rolling tolerances apply to the delivered section.

The plastic section modulus about the major axis, Wpl,y, is 335.93 cm³, and the elastic modulus Wel,y is 290.05 cm³. Wpl,y is what sets the moment capacity of a Class 1 or 2 section: M_pl,Rd = Wpl,y x f_y / gamma_M0, so at S355 with gamma_M0 = 1.0 this section reaches about 119 kNm before any stability check.

The second moment of area about the major axis, Iy, is 2,943 cm⁴, and about the minor axis Iz is 2,943 cm⁴. Iy is the value deflection depends on - for a simply supported beam under a uniform load, the midspan deflection is 5wL⁴/384EIy - so on spans where a deflection limit governs rather than strength, this is the number that decides the section.

iy is 8 cm about the major axis and iz is 8 cm about the minor axis. Column buckling is governed by the SMALLER value: the slenderness is lambda = L_cr / i, so with iz = 8 cm a 0.8 m effective length already gives lambda = 100. Minor-axis buckling almost always controls unless the weak axis is restrained.

The St Venant torsion constant It is 4,620 cm⁴. Closed sections carry torsion in a shear flow around the perimeter, which makes them far stiffer in torsion than an open section of the same weight and is usually why one is specified.