CLT Grade V1 (PRG 320) - Design Values

CLT Grade V1 (PRG 320) is a cross-laminated timber (clt) grade with reference design values to ANSI/APA PRG 320. Its reference bending value Fb is 900 psi, compression parallel Fc is 1,350 psi, and modulus of elasticity E is 1,600,000 psi (NDS). Values are shown before adjustment factors; apply the relevant NDS C-factors or EC5 k_mod and γ_M for your load case.

Fb (bending): 900 psi
Fc (compression): 1,350 psi
E (modulus): 1.6M psi

Representative values. V1 major-direction laminations are No. 2 Douglas Fir-Larch (visually graded). Panel capacity depends on the layup - use PRG 320 panel tables for design.

Reference design values (NDS 2018)

Fb	Bending	900 psi
Ft	Tension parallel	575 psi
Fv	Shear parallel	180 psi
Fc⊥	Compression perpendicular	625 psi
Fc	Compression parallel	1,350 psi
E	Modulus of elasticity	1,600,000 psi
Emin	Modulus for stability	580,000 psi

Source: ANSI/APA PRG 320. Reference values are shown before adjustment factors (NDS C-factors / EC5 k_mod, γ_M) - apply these per your load case in design.

Other Cross-Laminated Timber (CLT) grades

CLT Grade E1 (PRG 320)CLT Grade E2 (PRG 320)CLT C24 laminations (EN 16351)

Rate this

No ratings yet

Loading…